Answering now, 24 hours a dayMobile locksmith based in Chelsea SW307520 643913
IDNChelsea LocksmithLocal locksmith for SW3 and SW10 07520 643913

Lock Repair Chelsea Stiff and Jammed Locks Fixed

Get a lock repair price No call out fee

Preferred contact method

We call you back with a price before anyone sets off. Nothing is added on the doorstep.

Our lock repair Chelsea service fixes stiff, sticking and jammed locks on timber, uPVC and composite doors across SW3 and SW10, usually the same day and often within 30 minutes. A lock repair costs £35 to £60 with no call out fee, agreed on the phone before we travel. Most faults come from a dropped door, a misplaced keep, dried out mechanisms or a worn cylinder rather than a broken lock, so we diagnose first. If replacing the lock works out cheaper than repairing it, we tell you and give the price before any work starts.

  • DBS checked locksmith
  • Public liability insured
  • Over 5 years working in Chelsea
  • Price agreed before work
  • No call out fee

Repair first: what a lock repair visit covers

Plenty of locks condemned as broken are perfectly sound. The lock is fighting something around it: a door that has sagged on its hinges, a keep plate that has shifted after repainting, a bolt binding against the frame, or a mechanism that has not been lubricated in years. Replace the lock and leave the cause, and the new one soon struggles too.

On a repair visit we open the lock up where possible, check how the door sits in the frame, look at the key and the keep, and test the lock with the door open and closed. That last test tells us a lot. A lock that turns freely with the door open but stiffly when closed is almost always an alignment problem, not a lock problem.

Lock repair diagnosis: symptom, cause, fix and price

SymptomLikely causeFixPrice
Key turns easily with door open, stiff when closedBolt or latch catching on the keepKeep adjusted or door realigned£35 to £60
Mortice key gritty or tight at every turnDry levers or worn keyLock cleaned, lubricated and checked£35 to £60
Nightlatch will not hold the door, or snib slipsWorn latch springs or loose stapleAdjusted, or nightlatch replaced£35 to £60 repair, £50 to £75 replace
uPVC handle floppy, will not return to levelBroken handle spring or worn gearboxHandle or gearbox replaced£55 to £115
uPVC door needs a hard lift to lockDoor dropped, keeps out of lineKeeps and hinges adjusted£35 to £60
Key goes in but cylinder will not turnWorn pins or damaged camEuro cylinder replaced£40 to £65
Mortice bolt will not throw at allBroken lever or bolt mechanismBS3621 deadlock fitted£60 to £85

The table is a guide, not a diagnosis over the phone. Describe the symptom when you call and we will tell you which line it sounds like.

Lock repair prices in Chelsea

Repair first; replacement prices shown for when the lock itself has failed.

JobTypical price
Lock repair (stiff, jammed lock)
Diagnosis, adjustment, cleaning and lubrication
£35 to £60
Euro cylinder change
Standard to TS007 3 star anti snap
£40 to £65
Nightlatch replaced
Standard to British Standard
£50 to £75
BS3621 mortice deadlock
Supplied and fitted
£60 to £85
uPVC gearbox or multipoint mechanism
Failed gearbox or hooks replaced
£55 to £115
Door closer fitted or repaired
Slamming or weak closers on flat doors
£40 to £75

Prices include parts and labour. The lower figure is a standard daytime job, the higher figure covers nights, weekends and high security parts. Your exact price is confirmed on the phone before we travel, with no call out fee. See the full Chelsea price list.

Sticking mortice locks in Chelsea period doors

The 5 lever mortice deadlock is the standard lock on the timber front doors of Chelsea's Georgian and Victorian houses, usually paired with a nightlatch higher up. These locks last decades, but they suffer in two ways. Paint builds up around the keep each time the door is redecorated, so the bolt no longer slides in cleanly. And keys cut from copies of copies gradually lose accuracy, so the levers lift unevenly.

We clear and reset the keep, clean and lubricate the mechanism with a suitable lock lubricant, and check the key against the lock. If the key is the problem, a fresh one from a good original often cures it. For more on Chubb, Union and Era mortice locks see our mortice lock repair and replacement page.

Jammed lock or dropped door?

Heavy period doors and long uPVC doors both drop over time. Hinge screws loosen in old timber, hinges wear, and in winter the timber swells. The result is that the bolt sits a few millimetres lower than the hole it should enter. You notice it as a lock that needs the door lifted, pulled or pushed before it will turn.

Fixing the door is often the whole repair. On timber doors that means refixing hinges into sound wood and moving the keep. On uPVC doors it means adjusting the hinges and keeps, which are designed to be moved. If the frame itself is damaged or the door is binding along its length, our door repair service deals with that.

Floppy uPVC handles and doors that will not lock

A uPVC handle that droops is usually a broken spring inside the handle or a worn gearbox inside the door. The gearbox is the part that turns handle movement into the hooks and rollers along the door edge. Keep forcing a failing gearbox and it can jam with the door locked, which turns a planned repair into a lockout.

We identify the mechanism, often from a maker's mark on the faceplate, and replace the gearbox or the handle. The uPVC door lock repair page covers multipoint systems in detail, and our guide on why uPVC door locks fail explains how to stop it happening again.

Repairing locks on flat entrance doors and shop doors

Flat entrance doors in Chelsea mansion blocks are usually fire doors fitted with a self closer. When the closer weakens or is set too hard, the door either slams the latch against the keep or fails to close fully, and the lock gets the blame. Adjusting or replacing the closer, at £40 to £75, often cures what looked like a lock fault.

Repairs on a fire door must keep its rating, so we use compatible parts and do not cut extra holes or fit unsuitable hardware. Shop doors along the King's Road take far more daily use than a home door, and their locks and closers wear faster. Our page on fire door locks covers the rules for both.

Is it cheaper to repair or replace a jammed lock?

Repair makes sense

The lock body is sound and the fault is alignment, dirt, a worn key or a loose fitting.

£35 to £60, lock keeps working.

Replace a euro cylinder

Pins worn or cam damaged. Cylinders are not worth stripping, and a new TS007 3 star one adds snap protection.

£40 to £65.

Replace the mortice or latch

Internal parts broken, or the lock is below the BS3621 standard your insurer expects.

£50 to £75 nightlatch, £60 to £85 BS3621 deadlock.

Locks we repair across Chelsea and nearby

We repair the makes found on most London doors:

ChubbUnionEraYaleBanhamMul-T-LockAvocetUltionWinkhausFullex

We repair Banham locks too, but their registered keys can only be cut by Banham. Beyond SW3 and SW10 we cover Kensington and Fulham for planned repairs as well as emergencies. Our full list of services and the Chelsea price list show everything else we do.

Common questions

Why is my door lock suddenly stiff?

Most often the door has dropped or swollen, so the bolt rubs against the keep. Test it with the door open: if the key turns easily then, the lock is fine and the door needs adjusting. A gritty turn either way points to a dry or worn lock.

How much does it cost to repair a jammed lock in Chelsea?

A lock repair is £35 to £60 with no call out fee. If the lock has failed internally, replacement prices apply instead, for example £40 to £65 for a euro cylinder. You get the price on the phone before we set off.

Can I use WD40 on a stiff lock?

It is better avoided. It can clean briefly but tends to leave a residue that gathers dust and makes the lock worse over time. A dry PTFE or graphite lock lubricant is a better choice. If that does not help, the problem is probably alignment or wear.

My uPVC door handle has gone floppy, can it be repaired?

Yes. It is usually a broken handle spring or a worn gearbox. A handle can often be swapped quickly, and a gearbox or multipoint mechanism costs £55 to £115. Do not keep forcing it, because a failing gearbox can jam the door shut.

Should I repair or replace an old mortice lock?

If it is a sound BS3621 lock with a stiff action, repair it. If it is an older lock below that standard, or the levers are broken, a new BS3621 deadlock at £60 to £85 often makes more sense and keeps your insurer happy.

Lock sticking or jammed?

Call 07520 643913, describe the symptom and get a fixed repair price.